|
|
|
|
|
#1
09-14-2005, 10:15 PM
|
|||
|
|||
|
82 300D AC Clutch blows fuses
Newbie first post, couldn't find any help via search... 1982 Model 300D (turbo) 120K miles. It blows the 16 amp fuse for blower fans and AC clutch. I measured <2 amps through the fuse when just the blower fan is running, but it jumps to 18 amps (!) when ac or defrost is selected. The clutch engages, AC works, (until the fuse blows...) What next? Can the clutch be replaced seperately from the compressor? I have the Haynes manual with tiny wiring diagrams. Are there better choices for repair manuals?
|
|
#2
10-25-2005, 11:01 AM
|
|||
|
|||
|
I have the same problem with my 83 300DT. It started after I had a new A/C compressor installed. Thought some knowledge might post a remedy. It will melt a fuse in a new york second. No heat and no air. Let me know if you find anything out.
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Final chapter for 190E clutch saga (I hope) | Greg in Oz | Tech Help | 8 | 12-13-2012 12:10 PM |
| 1983 300d turbo fan clutch help | stumblebum | Diesel Discussion | 0 | 06-23-2004 07:44 PM |
| 201 clutch slave cylinder swap and post mortem | Duke2.6 | Tech Help | 1 | 05-24-2004 03:54 AM |
| Will Alum 240D Air Cleaner Fit on 300D | tcane | Diesel Discussion | 0 | 01-10-2002 07:33 PM |
| HELP! My 300D overheats. | mark300d | Tech Help | 10 | 10-13-1999 01:23 AM |
Linear Mode
