|
|
|
|
|
#1
11-21-2005, 11:13 AM
|
|||
|
|||
|
Diesel Injector Rebuild - Reccomendations?
I did a search, but really didn't come up with anything. I just sent my 500E's injectors out to be tested and rebuilt for $12/each.
My 98 E300 has some horrid injector knock.. I figure I should get it done. Any reccomendations? Thanks! 
|
|
#2
11-21-2005, 12:28 PM
|
||||
|
||||
|
Can you restate the question in English?
__________________
1984 300SD Turbo Diesel 150,000 miles OBK member #23 (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination
|
|
#3
11-21-2005, 12:57 PM
|
||||
|
||||
|
Shopforum member TomJ.
__________________
Rick Miley 2014 Tesla Model S 2018 Tesla Model 3 2017 Nissan LEAF Former MB: 99 E300, 86 190E 2.3, 87 300E, 80 240D, 82 204D Euro Chain Elongation References
|
|
#4
11-21-2005, 12:58 PM
|
|||
|
|||
|
You understood the question - Don't be an *********.
|
|
#5
11-21-2005, 01:06 PM
|
||||
|
||||
|
Quote:
__________________
'83 240D with 617.952 and 2.88 '01 VW Beetle TDI '05 Jeep Liberty CRD '89 Toyota 4x4, needs 2L-T '78 280Z with L28ET - 12.86@110 Oil Burner Kartel #35 http://i16.photobucket.com/albums/b1...oD/bioclip.jpg
|
|
#6
11-21-2005, 01:16 PM
|
|||
|
|||
|
I got my 500E (NOT DIESEL) injectors rebuilt for $12/each.
They do not rebuild diesel injectors. I am now looking to get my E300 (DIESEL) injectors rebuilt for around the same price.
|
|
#7
11-21-2005, 01:19 PM
|
|||
|
|||
|
Last time I read TomJ no longer does this job. I think your only options are to either find a local diesel injection shop or buy an injector tester and do it yourself. First though, I'd try some Diesel Purge.
__________________
2004 VW Jetta TDI (manual) Past MB's: '96 E300D, '83 240D, '82 300D, '87 300D, '87 420SEL
|
|
#8
11-21-2005, 03:15 PM
|
|||
|
|||
|
re: DIY injector rebuilding/balancing. Has anyone found a source for shims?
__________________
1971 220D/4-speed ~250K mi. Family owned (dads side) through three generations since <5K miles. 1992 Chrysler LeBaron, 3.0V6 125K. Family owned (moms side) through three generations since new. 1977 Chevy Camaro Continual hotrod project 1970 Cadillac Sedan DeVille 472ci and nearly 19' long 1974 Fiat Spider Still needs work
|
|
#9
11-21-2005, 03:36 PM
|
||||
|
||||
|
Quote:
$12 for 500E injectors seems like a deal. I always thought gas cars required new ones, ie the old ones could not be rebuilt. I don't know of anywhere you could have diesel injectors done for $12, but TomJ will soon come back into the fray. I have two sets from him and they are good. Until then I'd just do a 4-can drive-around-the-block-with-it Lubro-Moly purge. Really get on it when you take it for a spin.
__________________
'02 BMW 325i '85 300D 450k '93 190E 2.6 170k(killed by tree) '08 Ducati Hypermotard 1100S 6k '06 Ducati S2R800 14k(sold)
|
|
#10
11-21-2005, 04:33 PM
|
||||
|
||||
|
Clarkson in New Haven CT can rebuild them. If you want to ship them to CT. I'll get you Clarkson's contact info if you want.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200
|
|
#11
11-21-2005, 04:35 PM
|
|||
|
|||
|
Quote:
__________________
82 300D....went to MB heaven 90 350 SDL....excercising con rods
|
|
#12
11-21-2005, 04:42 PM
|
||||
|
||||
|
I don't even know if they will get involved in shipping. But usually they test them and then rebuild whatever ones test bad. So their is no core charge.
Their number is (203) 787-6746. They do good work they did my injectors and my friends. For a 603 I think it costs about $70 per injector. But not all 6 will need to be rebuilt. I had 4 bad ones, and my friends E300D had one bad injector at 150k miles. It was nailing slightly.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200
|
|
#13
11-21-2005, 11:24 PM
|
||||
|
||||
|
Quote:
__________________
#dieselFLEET --------------- '97 E300 '99 E300
|
|
#14
11-21-2005, 11:27 PM
|
||||
|
||||
|
Quote:
TurboD... let us know how much fun it is to pull the injectors. I'm been meaning to do it myself as I know one injector is bad on mine, you can hear it clearly nail on one cylinder when cold.
__________________
#dieselFLEET --------------- '97 E300 '99 E300
|
|
#15
11-22-2005, 02:41 AM
|
||||
|
||||
|
(Diesel) injectors
Gentlepersons,
"Hang On To" your ORIGINAL injector nozzles. Find a BOSCH authorized S.S. to rebuild your injectors with the ORIGINAL nozzels. New (O.E.) or Aftermarket replacement injectors may have DEFECTIVE parts manufactured in a forth world sweatshop with POOR Q.C.
|
 |
| Bookmarks |
|
|
Linear Mode
