|
|
|
#1
|
|||
|
|||
pre-filter on backwards...OK??
after doing some work on the fuel lines I noticed that the new clear bosch pre-filter I just installed is backwards (as per the arrows on it). It runs fine, should I bother changing it again???
thanks... also I posted in the tech section a question about running wires in my 124, if you can help with that I would be very gratefull... |
#2
|
||||
|
||||
It will work
But there is much more surface area on the outside of the filter than the inside. Also, you won't be able to visually inspect the contaminent level. The outside will always look clean.
__________________
04 Sprinter 140" 2500 97 F450 7.3L 97 K2500 6.5L 76 Mercedes 300d 98k original 78 300CD 133k "It has recently been discovered that research causes cancer in rats." -Steven Wright |
#3
|
||||
|
||||
Will take you about five minutes to change, please go and do that. Then you'll have no worries.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#4
|
||||
|
||||
Flip it around, it probably took longer to write the post then to turn it the right way.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
Bookmarks |
|
|