|
|
|
#1
|
|||
|
|||
Need HELP with fuel leak
Hello all need help with my wifes 93 300D (W124 chassy) it has developed a reasonably bad fuel leak under (please see picture) adapters to the injectors from injector pump. My question(s) 1) are there copper washers used for sealing the fuel under these connectore as it progresses to the injector fuel copper lines or 2) are there neoprene O rings under there to perform said sealing.
Are there gotchas (springs, steel balls) I should look for as I lose these adapters to stop the leak. Thanks in advance for your responses and help.
__________________
Adriano 83 300SD 500,300 miles (Well seasoned work horse AKA "Put Put") 93 300D 245,000 miles (Moms Baby AKA "Sweat Pea") 87 300D 185,000 miles (Life giver, aka parts car for my 300SD) |
#2
|
|||
|
|||
Hi, your o-rings are leaking. There are copper washers as well. Do a search on delivery valves. Plenty of info there.
__________________
2004 VW Jetta TDI (manual) Past MB's: '96 E300D, '83 240D, '82 300D, '87 300D, '87 420SEL |
#3
|
|||
|
|||
Need HELP with fuel leak
Thanks for the reply.
What is the wrench used to take the distribution valve called and where can it be purchased or rented? Thanks again for the help. Adriano.
__________________
Adriano 83 300SD 500,300 miles (Well seasoned work horse AKA "Put Put") 93 300D 245,000 miles (Moms Baby AKA "Sweat Pea") 87 300D 185,000 miles (Life giver, aka parts car for my 300SD) |
Bookmarks |
|
|