|
|
|
#1
|
|||
|
|||
Removal of Modulator (green Top) from the transmission
82 300SD:
Any hints on how to remove it from the transmission. Turn counter clockwise and push in at the same time ?. I dont want to damage anything in there. Any suggestion on how to remove it. Thanks in advance ! |
#2
|
||||
|
||||
Theres a plate that holds it in with 2 allen head bolts on each side. Once those are out its just friction holding it in so gently rotate and pull out.
__________________
Adam Lumsden (83) 300D Vice-President of the MBCA International Stars Section |
#3
|
||||
|
||||
Carefull of the plastic pin that is in there. Any make sure the one that is in the car will work with the new modulator. I had to switch form one that looked something like this:----l- to on that looked something like this: ----==. If the piston part of the modulator has a little hole in the middle you need the first on. If the piston is metal and doesn't have a hole in it you need the second one.
__________________
Andrew '04 Jetta TDI Wagon '82 300TD ~ Winnie ~ Sold '77 300D ~ Sold
|
#4
|
|||
|
|||
Unless the modulator is pulled straight out, you will likely break the pin.
|
Bookmarks |
|
|