|
|
|
|
|
|
|
#1
05-26-2006, 04:21 PM
|
||||
|
||||
|
83 300d, hi/low pressure
where are the hi and low pressure fittings on this car. i found one on top of the engine(hi pressure i think), but the other is quite elusive. maybe i'm going blind
 for the a/c, guess i should add that
__________________
rodney Last edited by RROSIN1; 05-26-2006 at 05:13 PM. 
|
|
#2
05-26-2006, 05:51 PM
|
||||
|
||||
|
The fitting at the top is the LOW pressure fitting. That is your suction line from the evaporator to the compressor.
The High side fitting is down below the turbo against the block, just behind the alternator. Follow the hose from the manifold going under the engine and at the base of the radiator. As it goes next to the engine block, the fitting is right there. Dave
__________________
1970 220D, owned 1980-1990 1980 240D, owned 1990-1992 1982 300TD, owned 1992-1993 1986 300SDL, owned 1993-2004 1999 E300, owned 1999-2003 1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD 1988 560SL, 100,000mi, owned since 1995 1965 Mustang Fastback Mileage Unknown(My sons) 1983 240D, 176,000mi (My daughers) owned since 2004 2007 Honda Accord EX-L I4 auto, the new daily driver 1985 300D 264,000mi Son's new daily driver.(sold) 2008 Hyundai Tiberon. Daughters new car
|
 |
| Bookmarks |
|
|
Hybrid Mode
