|
|
|
|
|
#1
03-30-2006, 07:29 PM
|
|||
|
|||
|
Vinyl Fuel Lines
I want to replace the discolored the vinyl lines that connect from primer pump and fuel filters as well as the one for the alda. Where is the best place to find a place for these? I cant find them anywhere.
__________________
1983 300SD White with Grey interior 
|
|
#2
03-30-2006, 07:33 PM
|
|||
|
|||
|
The dealer is the best place and the cheapest too.
About less than $10.00 for the fuel filter to pump.
BenzDiesel
|
|
#3
03-30-2006, 08:59 PM
|
||||
|
||||
|
They are not vinyl. and you can get them for a reasonible price from anyone who deals with Benz parts...the brass fittings are part of the lines.
__________________
Proud owner of .... 1971 280SE W108 1979 300SD W116 1983 300D W123 1975 Ironhead Sportster chopper 1987 GMC 3/4 ton 4X4 Diesel 1989 Honda Civic (Heavily modified) --------------------- Section 609 MVAC Certified --------------------- "He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
|
|
#4
03-31-2006, 12:24 AM
|
|||
|
|||
|
My guess is they are nylon. McMaster sells DOT grade nylon 11 tubing. Back in my SAAB days I used to replace those lines by warming the ends and driving the barbs on the banjo fitting into the tube. just make a split clamp to hold the tube. I got the idea from the SAAB FSM, which showed just how to do it.
__________________
'82 300SD - 361K mi - "Blue" "Good judgement comes from experience. Experience comes from bad judgement." listen, look, .........and duck.
|
|
#5
03-31-2006, 07:32 PM
|
|||
|
|||
|
I believe the trade name for that line is Vytek.
|
|
#6
03-31-2006, 10:49 PM
|
|||
|
|||
|
Quote:
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
