|
|
|
|
|
#1
05-24-2006, 10:40 AM
|
|||
|
|||
|
Thread size?
Does anybody know the thread size for the 12MM bolts that hold the front brake rotor to the hub?
The three choices are (12-1.25) / (12-1.50) / (12-1.75) A couple of my bolt heads stripped out, and I had to drill them to get them out. While drilling, I smoothed off the threads at the bottom of one of the holes. I'm sure it will still hold, but I want to put some JB weld into it and retap to make it pretty again. $185 for a new hub plate! 
__________________
1982 300CD Petrol/Black Leather 
|
|
#2
05-24-2006, 10:58 AM
|
|||
|
|||
|
For reference, the lug bolts are M12-1.5. So comparing the rotor bolts to the lug bolts should answer your question.
|
|
#3
05-24-2006, 01:50 PM
|
|||
|
|||
|
Mine are the same size as the lug bolts (M12-1.5)
*Double checked with a tap. Thanks for the tip!
__________________
1982 300CD Petrol/Black Leather Last edited by 1983/300CD; 05-24-2006 at 03:33 PM.
|
 |
| Bookmarks |
|
|
Linear Mode
