|
|
|
#1
|
|||
|
|||
oil filter housing???
What is the purpose of the tube that runs down the center of my oil filter housing on my 95 E300D? My 83 300D dosen't have this tube. What dose it do and when should the two rubber O-rings be changed? Jay
__________________
Thank you, Jay 83MB 300D 241K "The silver coffin" 10 Prius lll 1K 95 MB E300D 120K Mable 02 Saab 9-5 Areo 131K Cannondale SR500 www.thecornerstonefamily.org/ |
#2
|
|||
|
|||
My '96 606 doesn't seem to have such a tube. Rather, there's a plastic piece attached to the cap which goes through the filter.
I assume that the O-rings close off the separate passages. When you remove the filter, the oil in the housing drains into the sump. I replace the O-rings with every filter change. They come with the filter. |
#3
|
|||
|
|||
Matt,
What brand filter are U using? I have used a lot of different filter brands and none of them had the small o-rings in the package, only the large o-ring for the top of the filter housing and some copper ring gaskets. P E H |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|