Priming the fuel with no injector tubes.
 

With the tubes removed, when priming the pump what is supposed to happen ?

I was expecting the fuel to come out of the fittings but all that happens is that I hear a noise like air is coming out when I pump ?

is that normal. ?

http://i4.photobucket.com/albums/y14...y/DSC00657.jpg

I would not expect fuel to be expelled when the pump shaft is not turning. The primer pump will simply circulate fuel through the feed sump of the injector pump and return it through the check valve. I would not expect to have to prime the IJP at all since it is a displacement pump, and it will pass the air and fuel through the injectors once it builds up pressure.

Ok thanks


Also I cant pull the little rubber tubes off the injectors.. :confused: :confused:




I need to pull them offf so I can remove the injectors to clean them.

Ok got one of them out.


Does it look normal ?

http://i4.photobucket.com/albums/y14...y/DSC00658.jpg

http://i4.photobucket.com/albums/y14...y/DSC00659.jpg


damn my picutres suck !


OK HOW DO I CLEAN THESE THINGS !!! ??? !!!

That's the sound of the pressure regulator on the IP doing it's job. Fuel won't come out the fittings unless the engine (Or the IP if you are doing IP timing) turns.

Ah.. ok

Well i took the dirty injector apaprt and I clean it real good with carb cleaner.