Window Reg / Cruise
 

Hi all
I just Replaced the drivers side rear window regulator (the window would start making a poping noise when it reached the top and it had some slop in it.) and when i tried to use the switch it would not move up or down. But when i connected it to a controlled power supply the window would move easily. Does anyone have schematic or pin diagram.

Now problem number 2.
When i ran the engine and the used the stop lever to shut it off i noticed the actuator was making a wierd grinding type noise coming from it , i then ran all the tests that gdl had and it passed all of them except for when I applied 13.8v to pins 4 and 5 i could not get the servo to spin (the amperage was limited to 350 ma) but on 6 and 7 i coud get the relay to click.

btw the car is a 1985 turbo 300d.

Thanks
Zane