While replacing a missing starter bolt in one of my wagons I ran across a very easy way to deal with those allen bolts. I used my 10mm 3/8" drive allen socket inserted through my 10mm ratcheting box wrench. The wrench is made by Crescent and has a slight offset to it. This combination worked great and made accessing both bolts very easy. I was even able to put a short section of pipe onto the end of the wrench and hit it with a hammer for more force.
So no more drilling holes in the firewall for you folks until you've given this method a try.
-Tad
07-30-2006, 06:28 PM
Linear Mode
