|
|
|
#1
|
|||
|
|||
Fuel Line Question
This is a simple question but when I searched, I wasn't able to find the answer. When I was under my 1985 300sd I noticed that the 2 lines that I think were the return line and vent hose where wet. I figure it would be a good idea to replace all the fuel lines and the tank screen. I just need to know what hoses I need.
I have already replaced the injector return lines so I don't need those. I know I need the cigar hose, but are there 2 fitted hoses for my car? It is my understanding that there is a fitted hose return line to the tank and a fitted feed hose from the tank screen to the fuel feed line. I also need to know the i/d of the fuel line to/from the prefilter and the vent hose from the tank. As well, is there any other hoses I need or anything else I should do while the fuel lines are off and the tank is empty. Thanks |
#2
|
|||
|
|||
Quote:
|
#3
|
|||
|
|||
I've seen the kits from **************.com and diesel giant but I was wanting to save a few $$$. If someone could give me the part numbers and the i/d of the fuel line that would be great.
|
#4
|
|||
|
|||
Mike - Take a look at...........
the following link which is a diagram of fuel related lines/hoses etc.
http://www.performanceproducts4benz.com/Drawings.aspx?bmid=78 The following is one "fitted" hose I think you will need: http://www.performanceproducts4benz.com/productpage.aspx?pid=102720&name=Fuel+Tank+Out+Line I think the other rubber hoses are the same... 11mm I.D. ... see (6) in the diagram which is the first http link above. For this, see: http://www.performanceproducts4benz.com/productpage.aspx?pid=101202 Sam |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|