|
|
|
#1
|
|||
|
|||
glow plug dash light
Hey guys,
I just finished replacing my glow plugs, I tested the entire system according to DieselGiant, and now the car starts perfectly. The only problem is that my light inside is still not coming on. Are there any other places I should check before pulling out the cluster to replace the light? Thanks, -Berty |
#2
|
||||
|
||||
Can you check voltage to the bulb? If you have a wiring diagram, you should be able to attach to wires that lead to the buld, and put a volt meter to them.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#3
|
||||
|
||||
It takes 15minutes to do the bulb tops. you dont even have to undo anything in the cluster. Just pull the plastic under piece and pop out the cluster and you should have enough room....
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#4
|
|||
|
|||
sounds good, any idea what kind of bulb it is?
|
#5
|
|||
|
|||
Please let us know the outcome. A burned out bulb is almost never the issue.
Len |
Bookmarks |
|
|