|
|
|
#1
|
|||
|
|||
glow plug installation
I am installing glow plugs but dont know if I should use an anti seize compound, or some type of dielectric grease, or nothing. thanks in advance for your advice.
|
#2
|
||||
|
||||
anti seize IIRC.. did you ream the glow plug holes to rid the threads of carbon?
|
#3
|
|||
|
|||
A light dab of anti-seize will do. Don't gob it on, they need a good electrical ground path through the threads/body.
Last edited by ForcedInduction; 09-16-2006 at 09:17 PM. |
#4
|
||||
|
||||
I used copper anti-seize. Good to about 2000°F+ and makes great contact so you can use plenty.
__________________
Seth 1984 300D 225K 1985 300D Donor body 1985 300D Turbo 165K. Totaled. Donor Engine. It runs!!! 1980 300SD 311K My New Baby. 1979 BMW 633csi 62K+++? Dead odo |
Bookmarks |
|
|