|
|
|
#1
|
|||
|
|||
forum project
hey guys and gals, i am playing with an ideal and would appreciate your help in reference to installing a new in crate 1987 617.951 5 cyl diesel engine into a 1991 350sdl.
the us army paid over 22k for this engine and it came thru auction to me at 10%. i have been looking for a 126 body 81-85 that deserves the engine . appreciate any neg or positive input as i complete the research. larry perkins lou ky |
#2
|
||||
|
||||
22k for the engine..
so you want to put it into a W126 350SDL... should just fit right in.. only difference from the 350SDL and 300SDL is that the 350 is a few inches longer |
#3
|
|||
|
|||
clear understanding
thedon, sorry i didnt explain good enough, the engine i have is the 5 cyl that was install in the 81-85 300sd.
larry |
#4
|
||||
|
||||
where are you located.. i know of an SDL with 300k on an OG engine and a decent body for 1k
|
#5
|
|||
|
|||
location
louisville ky
|
#6
|
|||
|
|||
should fit
Larry - I don't think they changed the body/engine mounts in the later SDLs from the earlier SDs - I'm sure your engine will bolt right in. Nice find BTW.
John
__________________
John Hughes, was in Landstuhl, Germany but currently in San Antonio, TX 1978 280CE Astral Silver now 59,xxx miles and counting "Silber-Kugel" 1986 300E Black Pearl Metallic 143,xxx miles 5-spd daily driver w/ blk leather "Schwarz-Schönheit" 1989 190E 2.6 (euro) 5-spd Desert Taupe 112,xxx kms Had to leave behind in Germany!!! "Helga" 1983 300D Pastel Beige now 312,xxx + miles SOLD OBK#24 |
#7
|
||||
|
||||
Should bolt in with mount arms off an 126 SD.
Might have to find the right transmission for it. There is a ring between the engine and transmission. Not sure if the ring off the 350SDL will let you keep the 350SDL tranny. Does it have a flexplate or flywheel? You will need gsxr to advise you if it's an EDS IP. Are there electrical connectors on the IP? Sixto 93 300SD |
Bookmarks |
|
|