Hello Newbe Here, First I have to say this is a GREAT Forum with a wealth of info!

I have a 1983 300D with a Clifford Car Alarm installed I'm guessing when the car was new. Someone thru the years removed parts of it and just left a bunch of wires in place. The alarm horn was removed and the wires leading to it was just cut and left dangling.

I removed what I think is all the wires and some kind of Bosch relay
switch to the alarm. There was a connector with a bunch of wires in it that was
unattached, that seemed it should be attached to some brain unit. But no
brain unit could be found.
I removed all the wires under the dash, the wires attached to the
interior light switch on the door jams and the wires under the hood on the
right side. This includes what I think is the shock sensor.

Now car will not start! Also the interior lights do not come on. Do you know where I could get a wiring diagram for a Clifford Alarm?

Any Help would be great!

__________________
CJ

1983 300D 12X,XXX

Well I got the car started. But I still would like a diagram of the Alarm system if anybody has one.?.?.?

__________________
CJ

1983 300D 12X,XXX

If it looks out of place, it probably is...

FWIW - Clifford made KILLER alarms back before DEI bought them out.

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]