|
|
|
#16
|
|||
|
|||
I'm also experiencing the same thing on my '87 SDL. I still use it everyday. Please post any further info, since it will be useful.
__________________
99 C230K Sport 87 300SDL 81 300SD |
#17
|
|||
|
|||
Any status on this one?
__________________
99 C230K Sport 87 300SDL 81 300SD |
#18
|
||||
|
||||
Car decided it did not want to run anymore, I'm going to try to get him started today.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#19
|
||||
|
||||
Car started today, go figure. I will have time maybe Sunday to play with the vac. Will post results.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#20
|
||||
|
||||
Trans is getting serviced today.
What are the odds that the Vac Control Valve is bad on the IP? Also, I am going to buy a Mity-Vac... where's the place to score one with the adapters and what-not needed?
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#21
|
||||
|
||||
Issue resolved, will post what was the issue in a few hours tops. I had no vac to the trans.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#22
|
||||
|
||||
Okay, atop the vac pump there is a nipple that sends vac to the emission bits on the passenger side and vac to the trans and climate.
Anyway, I purchased a two outlet piece to replace the factory four outlet as my emission bits are all gone. Well, it was molded wrong and I had a large hunk of plastic still jammed in it from it's molding! Got that piece out, no more banging. Full vac down to the trans.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
Bookmarks |
|
|