How do the trim panels at the side of the rear seat come out of a W123 300CD?
Seat is out. Found one screw and one clip, but it still doesn't want to release.
Any help?

__________________
1982 300SD " Wotan" ..On the road as of Jan 8, 2007 with Historic Tags

I beleive there is only one screw, which along the top about 18 inches to the rear of the shoulder belt access hole. Should be the same screw which secures the sail panel trim piece. What is holding it in, is the area behind and under the chrome reveal molding. The bottom of that molding has a lip on the inside towards the glass. This lip uses 2 or 3 molding clips to secure the upper trim panel to a bracket, which is attached to a metal plate, behind the the trim piece. If you pull upward on the trim panel it should pull loose from those clips and come right out. Try to pull up gently and evenly so you don't break the trim panel.

Thanks, will do.

__________________
1982 300SD " Wotan" ..On the road as of Jan 8, 2007 with Historic Tags