|
|
|
#1
|
||||
|
||||
Window will not go all the way up
Any ideas?
__________________
-E300d '99 350k -Suburban '93 220k -TDI Jetta '03 350k Sold -F250 '96 7.3 -Dodge Ram 12V -E320 '95 200k -E320 Wagon 1994 155k -300d Turbo '87 187k miles -E320 1994 200k -300d Turbo '84 245k (sold to Dan62) -300d Turbo '84 180k -300sd '80 300k -7.3 Powerstroke Diesel 15P Van 500k+ miles -190d '89 Non Turbo 2.5 5cyl 240k (my first MB) Tom's Imports of Columbia MO Ruined the IP in changing leaky delivery valve O-Rings - Refused to stand behind his work. Mid-MO MB drivers-AVOID Tom's. |
#2
|
||||
|
||||
it is probably the slide is out of it's groove, usually happens when the bolts holding the regulator wiggle loose. open up the door panel and loosen the three bolts holding the regulator, then align the slide in the groove, and tighten it back up.
John
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
||||
|
||||
window regulator
When this happened on a rear door in my td, the problem was worn teeth on the regulator. Every regulator, for the rear doors, I have pulled at a junk yard seems to have alot of wear on the teeth. Must be a bad design.
__________________
a few mb diesels |
#4
|
|||
|
|||
Window
1984 300d Turbo 142,ooo
Replace The Window Motor And Regulator This Site |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|