|
|
|
#1
|
||||
|
||||
1981 300 SD Starter problems
so heres my problem my starter would stay engaged after the car started and i would have to disconnect the battery terminal to make it stop and beat the starter. one day it the starter totaly stopped working at all so i replaced the starter and i dont her a click or anything its not even trying to power the starter. what should i do?
|
#2
|
|||
|
|||
First thing to do is make sure all your wires are connected to the starter and battery.
|
#3
|
||||
|
||||
unless i missed somthing everything is connected
|
#4
|
|||
|
|||
Have you tried starting it in Nuetral as opposed to park? Flip between the two a few times while trying to crank and see if it engages. Maybe the Nuetral safety switch.
__________________
1983 300SD White with Grey interior |
#5
|
||||
|
||||
I recently had my starter replaced on the SD. With the Bosch unit came a brochure with some trouble shooting hints. "Starter continues to spin momentarily after key is released: Starter drive is defective remove and replace starter." Hope this helps.
__________________
83 SD 84 CD |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|