|
|
|
#1
|
|||
|
|||
Transmission shifter rattles when I put it in drive...
The transmission shifter rattles when i'm going down the road in drive. There is a little bit of play in there but if I stick an ink pin between the D slot and the shifter to apply a little bit of pressure it stops. And a couple of times the transmission will not engage in D unless I pull it down a little bit. Is there a little bushing in there that would make it do this?
__________________
1985 Mercedes 300DT |
#2
|
|||
|
|||
Classic sign of worn shifter bushings.
They are available as replacements and need to be pressed into the shifter arm and the transmission arm. I removed the shifter to do this job, but, others have managed to get a suitable vice grip in there and press them in place while the shifter remains in the vehicle. |
Bookmarks |
|
|