|
|
|
#1
|
|||
|
|||
slave cylinder stroke length
Anybody know what the stroke length should be for a slave cylinder off a 300D euro 4spd? I am in the process of doing a manual trans swap and the slave stroke is about 1/4". Is this correct?
__________________
2001 Dodge Ram 2500 Cummins Turbo Diesel - 4x4, auto, 3.54 gears, long bed ------------------------------------- '92 300D 2.5 Turbodiesel - sold '83 300D Turbodiesel - 4 speed manual/2.88 diff - sold '87 300D Turbodiesel - sold '82 300D Turbodiesel - sold |
#2
|
||||
|
||||
you said the sroke is about a quarter inch?? thats way too small of a stroke it should be about an inch or two.
|
#3
|
|||
|
|||
I've only observed the stroke on my 307d but I'm virtually certain it was longer than 1/4".
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#4
|
||||
|
||||
I cant say for sure either but, I am sure its more than 1/4 inch. Its an easy job and not to spendy anyway
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#5
|
|||
|
|||
Thanks for the replies guys. I just wanted to make sure before I buy a new one. This swap is taking me too long.
__________________
2001 Dodge Ram 2500 Cummins Turbo Diesel - 4x4, auto, 3.54 gears, long bed ------------------------------------- '92 300D 2.5 Turbodiesel - sold '83 300D Turbodiesel - 4 speed manual/2.88 diff - sold '87 300D Turbodiesel - sold '82 300D Turbodiesel - sold |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|