|
|
|
#1
|
|||
|
|||
leaking between prechamber and head help!!
1992 300sd. took out injectors to have tested. reinstalled injectors. now I have 3 cylinders with compression leaks between PRECHAMBER and HEAD. must have disdurbed seat or seal. Done a lot of searches, but no clear answer. alot of answers about the crush washer/heat shield. this leak is OUTSIDE the prechamber. Need special tool to remove prechamber. need help locating tool. need to know how to reseal this prechamber. please help!!!
__________________
1992 300sd?? 1996 1500 6.5(sold) 1995 3500 6.5 1991 2500 6.2 |
#2
|
||||
|
||||
http://www.peachparts.com/shopforum/showthread.php?t=104619
I use google advanced search for prechamber tool in this website. several hits, this one is pretty good. John
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
||||
|
||||
On my 87 300 sdl, it was a 'special' tool. A 1/4 inch thick bar of flat iron ground to fit and a crecent wrench. I just turned them out from there. The crush wshers between the rechamber and the head are most likely the problem. You will need to take one of them out before you get them though. There are 3 sizes. .3mm, .5mm, and 1mm. Might as well replace them all while you're doing that.
__________________
All it takes for evil to prevail is for good men to stand by and do nothing. Too many people tip toe through life, never attempting or doing anything great, hoping to make it safely to death... Bob Proctor '95 S320 LWB '87 300SDL '04 E500 wagon 4matic |
Bookmarks |
|
|