|
|
|
#1
|
|||
|
|||
123 Side Trim?
I'm planning to use some 3m eurethane to reseal my windshield seal, but I have hit a major snag. The trim on the sides of the car that goes over the doors is in the way. How can I get it out? I found three screws holding it in front, but what's in back? How should I get it out?
__________________
1984 300DT turbo 138k mi Still hauling me to school and back. Handy Site: http://www.dieselgiant.com/ |
#2
|
||||
|
||||
actually you remove it from the back. There is a hidden screw to remove the gills behind the back doors. The gulley trim is a major PITA to remove. Good luck.
I would actually try to reinstall the windshield without removing the trim. That is unfortunately not the case with the 116 where you actually need to remove that gulley to even get to the windshield seal.
__________________
------------------------------------------ Aquilae non capunt muscas! (Eagles don't hunt flies!) 1979 300SD Black/Black MBtex239000mi 1983 300TD euro-NA. White/Olive Cloth-MBtex 201000mi. Fleet car of the USA embassy in Morocco 1983 240D Labrador Blue/Blue MBtex 161000mi |
#3
|
|||
|
|||
Actually, with some force, the front popped right up. I don't want to completely remove it, I just want to get it out of the way to recaulk the seal. This definitely works for me as it is.
__________________
1984 300DT turbo 138k mi Still hauling me to school and back. Handy Site: http://www.dieselgiant.com/ |
#4
|
||||
|
||||
if that works for ya that what counts!
__________________
------------------------------------------ Aquilae non capunt muscas! (Eagles don't hunt flies!) 1979 300SD Black/Black MBtex239000mi 1983 300TD euro-NA. White/Olive Cloth-MBtex 201000mi. Fleet car of the USA embassy in Morocco 1983 240D Labrador Blue/Blue MBtex 161000mi |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|