|
|
|
#1
|
|||
|
|||
240D to 300D swap
got most everything hooked up, now i have a few questions on the harness that connects to the glow plug relay there is a 2 pin connector that I know im going to have to add a wire to the car for. what and where does this wire need to go to , also I know Im going to have to add the over boost protection wiring anything else Im going to have to add that anyone knows of ?
|
#2
|
|||
|
|||
What color are the wires in the connector?
|
#3
|
|||
|
|||
No clue will have to look and see all I know for right now is its in the same harness as the glow plug relay connector (C137)
|
#4
|
|||
|
|||
well worked on the car some more tonight, turns out that extra pin on that connector is for the automatic climate control system which this car doesnt have so didnt need it anywho, worked on electrical problems mostly the people that owned it before us didnt have a clue, the dash lights didnt work so they just lived without, had a bad fuse. the ignition switch wouldnt start the car so they drilled a nice big hole in the under dash panel and put in a push button a relay and allot of red wire and all they needed to do was replace the neutral start switch (different trans now so thats an easy fix for me). they installed an new radio (very poorly I might add) and had a few wires strung all over the dash so I removed those. and the left rear window wont roll up or down and after I got it working appears to have been that way for a long long time with as sticky as the tracks are with dirt, it just needs a new switch. its funny how much effort people will put into rigging something up instead of just taking a little time and finding the problem. thats the fun of owning an old car never know what people have done to them
|
Bookmarks |
|
|