|
|
|
#1
|
|||
|
|||
Front brake job - now BAS/ABS Light and fading pedal
I have a 1999 E300td. Put new pads on the front. Started it up to see if I needed to bleed the brakes - BAS/ABS light is on now - pedal soft and fades. I bled the fronts. Light is still on and pedal is firmer, but still fades.
Also swapped Alternator so Batt had been unhooked. No brake issues before except worn pads. I cannot find a bleed valve on the ABS unit. I'm going out now to bleed the backs (didn't mess with them though) If the bleeding the back doesn't help, any suggestions? Is there a valve somewhere for the ABS that is hidden? Is there a reset sequence? Thx |
#2
|
|||
|
|||
I'd check the codes first and then check your brake light switch at teh top of the pedal before touching the ABS unit.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#3
|
|||
|
|||
Thx - Problem cleared while testing - Those are the best ;-)
|
Bookmarks |
|
|