|
|
|
|
|
#1
05-09-2007, 03:40 PM
|
||||
|
||||
|
York A/C hose 78 240D
I've been looking for the hose compressor to condensor. The one pictured in the online catalogs does not look like what I need: The fitting on the compressor end is different mainly it's missing the shrader valve port. Can these hose ends be recycled and have new rubber installed?
__________________
Over 21 years I owned several: w108 w110 w111 w115 w116 w123 w124 w126 w212 
|
|
#2
05-09-2007, 05:50 PM
|
||||
|
||||
|
A good A/C supply house can build anything you need.
__________________
I got too many cars!! Insurance eats me alive. Dave 78 Corvette Stingray - 3k 82 242 Turbo Volvo - Manual - 270k 86 300e 5 speed manual - 210k 87 420sel - 240k 89 560sl - 78k 91 420sel - 205k 91 560sel - 85k 94 GMC Suburban - 90k 97 Harley Davidson Heritage Softail - 25k 00 GMC Silverado 1 ton 30k
|
|
#3
05-09-2007, 10:59 PM
|
|||
|
|||
|
Did some looking and I found two different hoses from the Behr air conditioner compressor to condensor for the 123.123 body:
123 830 08 15 up to serial #009144 123 830 36 15 from serial #009145 to #110870 with a few exceptions close to the ending serial # They are definitely for the York compressor from the diagram I saw. Hope this helps.
|
|
#4
05-10-2007, 08:01 AM
|
|||
|
|||
|
Those hoses will cost $$$$ from the dealer....have one made-up by a a/c shop!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
