PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   87 300d No Air From Dash Vents (http://www.peachparts.com/shopforum/showthread.php?t=187838)

COLDSTART 05-09-2007 08:11 PM

87 300d No Air From Dash Vents
 
There is no air coming from the dash vents or the floor but the a/c works fine what could it be thanks for any help

arew264 05-09-2007 08:28 PM

Ever troubleshooted a vacuum system before?
This is a vacuum problem. The vents are controlled by vacuum pods that open and close flaps to block air. When a pod's rubber diaphragm cracks, you get air leaking in, which breaks the vacuum and makes the pod and most likely the whole system inoperable.

A simple test of this is to try to lock and unlock your doors with the A/C running. It probably won't work (if they do, then you are lucky and it could be a much more expensive electronics problem instead).

babymog 05-09-2007 08:30 PM

The door-lock test doesn't work on 201/124/140 and newer, they have a separate vacuum pump for the locks.

Bio300TDTdriver 05-09-2007 08:36 PM

Quote:

Originally Posted by babymog (Post 1502509)
The door-lock test doesn't work on 201/124/140 and newer, they have a separate vacuum pump for the locks.

That's what I was going to say? The default setting is out of the defrost. It's a fun job to take the dash apart and replace the pods.

Chris

COLDSTART 05-09-2007 08:57 PM

I have just found a post regarding the pods and the replacement of them I am printing them out as we speak mmm looks like fungsxr did the post

Bio300TDTdriver 05-09-2007 09:03 PM

Quote:

Originally Posted by COLDSTART (Post 1502527)
I have just found a post regarding the pods and the replacement of them I am printing them out as we speak mmm looks like fungsxr did the post

That is a great post by GSXR. It is the one I used to change mine.

Chris

arew264 05-09-2007 09:11 PM

Ah. I saw the 300d and went for it, guess I got mixed up in that 85 is the last year they were 123s, not 87.

I assume the pods and controls are probably about in the same place? If that is the case, you can test the pods from under the controls in the center console... I won't go into detail because I will be wrong :)

Hopefully someone can help you more than I can, I only know anything about 123s :rolleyes:

Bio300TDTdriver 05-10-2007 01:15 AM

You remove the glovebox to test the operation of the pods in the 124.

Chris


All times are GMT -4. The time now is 09:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website