|
|
|
#1
|
|||
|
|||
EGR question
can i just take off the vac line of do i have to remove it 100%
__________________
1985 300D - 599,xxxk - blue interior #265 Monark Nozzle, AL129X, 15" Ronals, Gen II Big Brakes hunting 1985 300D - 491,xxxk - in prog-{A-A IC, 3" exhaust, psi\pyro, 28*BTDC, Hella Euros, IP Limiter removal 1985 300TD - 783,xxxk - parts car,used new engine with ALDA cap inplace 1987 Kenworth T-600 8LL 425 CAT Mech. - 6,000,000+k - DEI exhaust wrap, punched through resonators, 1 recent rebuild, |
#2
|
|||
|
|||
Many simply remove the vac line, install a bb or a bearing in the line, and re-attach.
|
#3
|
|||
|
|||
Or you can order a kit from BC. I think they will be ready any day now.
Chris
__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous “Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss |
#4
|
||||
|
||||
I removed the valve on cam cover. The connectors near firewall, I replaced with new, just one fewer connection points. I have one of B.C.'s kits, probably will not use. They will make the engine compartment look good, unimportant to me.
__________________
83 SD 84 CD |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|