![]() |
Use Krytox on sunroof
I just recently purchased a 1985 300tdt and have been fixing it up.
One of the issues was the sunroof. It worked very rough and squeeky. I was told that you need to use a lubricant that wont attract dirt and dust or you will be constantly cleaning & re-lubing it. After some internet research I came across Krytox. It is about $35 for a 1/2 ounce syringe. I used it on all the contact points on my manual sunroof. It only took a very small shot in each area and after a few operations to work it in was very good. The sunroof operates like new, very smooth and silent. It now takes about 25% of the effort to operate the sunroof. It was worth the price just for the sunroof and I still have an almost full syringe to lube all other friction points on the chassis. Just thought I would pass on a tip for a great product. |
Um, for 50.00 from MB you get 1/2 POUND right? am I right? is this thing on?
|
It's so expensive because--
Krytox is a lubricant designed to be used in cleanroom environments where outgassing of various substances like petroleum products & silicones would contaminate wafer processing operations.
|
Quote:
|
Here's why
I read that farm equipment is lubed with a grease that contains krytox, due to its ability to withstand high pressure metal to metal friction points. It is also supposed to last forever in the application I am using it for. It is very clean and doesn't attract dust.
Though, I would have bought the half pound tub of MB lubrication Paste if I had found out about it before this thread. What do you want? I'm new.:wacky: I am still happy with the Krytox even though I was apparently swindled. |
Quote:
After the amount of work (days of pure torture)it took to get my sunroof back to happiness I wouldnt put anything on there except the MB sunroof grease. Now the Krytox may work great until the end of time - just IMHO not worth experimenting when the 'right stuff' is easily attainable. |
Quote:
|
I've heard that Sil-glide (available at NAPA for $4) is adequate.
|
I have used krytox for several years. These were applications where other lubricants were not feasable. Have any of you tried looking at the lubricants available for firearms? There are several that don't attract dirt, etc that might work. I will agree that you should always use the recommended lubricant for the application, but sometimes it pays to try something else. By the way, there are several grades of Krytox, you bought one of the better ones. When we first started using it, we paid well over $100 for about the same amount, so you didn't get swindled. They also make an oil that is at least that much per oz.
|
All times are GMT -4. The time now is 01:13 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website