|
|
|
#1
|
|||
|
|||
Missing steps in FSM on CD 300SD
Can you believe it? Missing steps 38 through 43 for the cylinder head install on the FSM on cd for the 300.SD. dont think its on there. Does anybody have a way i can get that info? What a pain...will get the book but need it to continue tomorrow..............................
much thanks tom |
#2
|
||||
|
||||
What year? I have some info on a 123, may help.
__________________
83 SD 84 CD |
#3
|
|||
|
|||
38. Tighten cylinder head bolds in steps in sequence of tightening diagram, starting with bolt 1.
The steps are as follows (double hex bolts) 40Nm 70Nm Wait 10 minutes 90° 90° 39. Place camshaft sprocket with timing chain on camshaft. Pat attention to color marks. 40. Position necked down screw for attaching camshaft sprocket and tighten to 80Nm. For this purpose apply counterhold to camshaft sprocket by means of a screw driver or a steel bolt. 41. Install both rocker arm groups. 42. Rotate engine at crankshaft by means of tool combination and set to ignition TDC of 1st cylinder. Check adjusting marks. 43. Install slide rail |
#4
|
||||
|
||||
Let us know what year, I have mitchell on demand and I can get whatever info you may need
__________________
OBJECTS IN MIRROR ARE CLOSER THAN THEY APPEAR, ONLY IN A BENZ 89 560SEC 90 350SDL (Rudolph) 91 350SDL (300SDL drivetrain) 87 BMW 635CSi (Swanhild) 89 BMW M6 (euro) 99 Suzuki Hayabusa (Only the fastest thing ever) |
#5
|
|||
|
|||
thats an 82 300 SD
Thanks again for all your help.
Tom |
Bookmarks |
|
|