|
|
|
|
|
#1
04-07-2015, 05:00 PM
|
|||
|
|||
|
85SD door lock tumbler
So, I'm in the process of rekeying the tumblers from the 85SD parts car hoping to install them in the 84SD and match the other 85SD so 1 key opens all locks on both running cars (84 & 85SD).
I have 1 front door handle with tumbler installed and don't see how the tumbler comes out. I removed the roll pin that goes through the handle and drilled out the pin that goes 1/2 way through. What else needs to come out? There are 3 more pins - 2 that pivot when the handle is pulled and another in the snout that goes to trip the actual latch inside the door. Do these have to come out? They look like a pita to get back. Most destructions I've seen deal with the actual re-keying once the tumbler is out.
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do. 
|
|
#2
04-08-2015, 10:46 PM
|
||||
|
||||
|
You might see if the info is in the manual. See if one of these sites work.
W126 FSM: http://www.startekinfo.com/StarTek/outside/12253/?requestedDocId=12253 W126 Untitled Document http://www.w124performance.com/service/W126/Main.html 126 CD 1 http://www.w124performance.com/service/W126/w126CD1/program/matrix.htm 126 CD 2 http://www.w124performance.com/service/W126/w126CD2/program/matrix.htm
__________________
84 300D, 82 Volvo 244Gl Diesel
|
 |
| Bookmarks |
|
|
Linear Mode
