|
|
|
#1
|
|||
|
|||
oil cooler help
i spent alot of hours yesterday working im to tired to think
does the oil go from the oil filter into the cooler then the front of the block or the other way around? thanks!
__________________
1985 300D - 599,xxxk - blue interior #265 Monark Nozzle, AL129X, 15" Ronals, Gen II Big Brakes hunting 1985 300D - 491,xxxk - in prog-{A-A IC, 3" exhaust, psi\pyro, 28*BTDC, Hella Euros, IP Limiter removal 1985 300TD - 783,xxxk - parts car,used new engine with ALDA cap inplace 1987 Kenworth T-600 8LL 425 CAT Mech. - 6,000,000+k - DEI exhaust wrap, punched through resonators, 1 recent rebuild, |
#2
|
|||
|
|||
The oil flows out of the oil filter housing from the lower hose fitting. It enters the oil cooler from the bottom and comes out the top. It returns
back to the oil filter through the upper hose fitting. It then flows through the filter element from the out side in and inward direction, then in through that little hole in the top of the riser pipe and back to the oil pan and bearings etc. It doesn`t go into the front of the block. and as a side note here, it flows through the oil cooler hoses. Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
Bookmarks |
|
|