Got around to troubleshooting the hazards.. replaced relay behind cluster and switch on dash... no hazards still. While testing after dash relay replacement, I noticed now as the switch goes from normal to hazard the light on the hazard switch would glow for a split second as it was rocked to the hazard position... once in the hazard position, turn signals no longer work and hazards don't work. If I keep the switch in between setting I can get hazards to work, if I am using the turn signal, but the switch won't stay in the "in-between" position so I can't activate the hazards and have them stay on even knowing this trick.

Anyone seen this before?

Thanks,
G