Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-20-2007, 08:53 AM
Registered User
 
Join Date: May 2007
Location: Manitoba
Posts: 70
Alda screw at stop, no smoke?

I've read thru several of the ALDA threads and tried adjusting mine in my 84 300SD. The cap had been removed previously by??? I was able to back the screw out another couple of turns till it would not turn any more. The low end power was better but there was no smoke under heavy load. The only black smoke tha can be seen is when you blip the throttle as the rpm snaps back there is a little puff of black.

As well I've read that my 0-60mph times should be close to 11s. Before I adjusted the ALDA they were high 17s. After, despite the better response in the low range, the times were still high 17s. New fuel filters and a rebuilt lift pump as well as a new idle rack bolt.

Any ideas from the experts?
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page