|
|
|
#1
|
||||
|
||||
Help with interior door trim on SD
My '84 SD has a broken part. The top of the interior door handle attatches to it. That part I can get at junk yard. What I need is the plastic trim that goes around the pull latch. Mine is spit, and I would like a replacement. Anybody know where to get one?
|
#2
|
||||
|
||||
There are a couple of 126's at the local p'n'p, at least a few weeks ago, I'll check. Driver or passenger side, they are specific. I have one passenger side.
__________________
83 SD 84 CD |
#3
|
||||
|
||||
Just went out to car and removed broken piece, it's coated metal. Part # 126 766 01 11/U 1L. Drivers side, black. Going to junk yard on
Wednesday, hope everything on list is there. Found out reason why opener levers sag, the Phillips screws that hold the bracket on get loose. Thanks Last edited by Ryan Z; 10-28-2007 at 10:29 AM. |
#4
|
||||
|
||||
I replaced a sagging door pull on a 123, the cast, pot metal had fatigued to the point of failure.
Is the metal piece the one that you need to remove the arm rest to install?
__________________
83 SD 84 CD |
#5
|
||||
|
||||
If you can't find it at a scrap yard (of which we essentially don't have any around here...sadly) the dealer probably has it....no idea what it'd cost though.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#6
|
||||
|
||||
Yes, the piece the arm rest attaches to and the trim piece.
|
#7
|
||||
|
||||
Any luck?
__________________
83 SD 84 CD |
Bookmarks |
|
|