I have been looking for advice or comments, little so far. Just wondering if this is an easy replacement part on my 1981 300d W123 sedan.

It says behind the accel pedal..is there alot of r/r involved or just plug and play?

Dakota

W123 300D 1981 China Blue 194K

Hey man it's very easy!! Just pull back the carpet a little for better access. I think you can get it out with a small screwdriver if I remember right.You will like the response from a new kick down switch.

__________________
If it ain't broke take it apart and find out why.

1983 300SD, 4 speed
1994 C280
1987 300TD wagon
1996 HD Road King

Ride in Peace Eric Peterson, Harley of Macon

very simple .. you may not even need a screw driver .. just un-do it from its circular housing and un-plug the connector .

That easy huh?..SWEEt. I will give this a try tomm..It SUX without it thats for certain..Much Mahalo guys for your response, i was getting to the point that noone had time to respond to such a pitiful request..LOL

Dakota

My kick down is disconnected at the switch. With the Bodine cable properly adjusted I still get a down shift but smoother than when the KD switch is plugged in. How dose all this work

__________________
1984 300SD turbo 126
"My true love"

God made me an atheist and who am I to question His wisdom

NO clue..Bodine cable?..is that name for the accelerator cable ? I am gonna try and install this switch today..we'll see

Dakota

Bowden cable......lots of info on the forum regarding it.

__________________
1981 240d - 135k - Arlene

Pardon my French. Bodine cable taken from my French MB engine manual

__________________
1984 300SD turbo 126
"My true love"

God made me an atheist and who am I to question His wisdom