My transmission was having trouble flaring on the 2-3 shift. I figured I would try to switch out the k2 valve spring as this only costs $10. I took the valve body off and then stupidly undid all of the 10mm bolts holding the valve body together. When I did this 3 steel balls fell out. I am unsure what level they came from. All of the plastic valves and springs are still in their original places, I just dont know where to put these balls back in. The tranny is a 722.118. Does anyone have the diagrams for this? Thanks a million, help me fight the war on stupidity. I promise I will learn from my mistake!