Hello,
The wipers stopped this morning(19 degrees and heavy frost). I can hear the motor moving per cycle swipe but the wipers do not move at all. Is this a loose cog or pin that I can tighten on the motor? Is there an individual motor for each wiper? I read that it could be the column wiper switch, but I can hear the motor when I turn the switch.
Thanks in advanced for your time and help.
A

__________________
1987 300SDL
187,000 miles

Look at you wiper motor and make assurances the bell crank has not detached itself from the motor shaft.

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)

TX76513,
Thanks for the reply. I am not familiar with the wiper functionality. Where and what does the the bell crank look like?
Thanks
A

__________________
1987 300SDL
187,000 miles

Sending you a PM. Pic to large to post.

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)