|
|
|
#1
|
|||
|
|||
crush washer size???
Anyone know the size of the aluminum washer (sealing ring) for the fuel filter bolt and where to get one? AutoZone and Advanced don't have the right size and I'm suspecting that is where my air leak is coming from since there isn't any washer on the bolt in my car. Also, what are the washer sizes for the fuel banjo fittings... might as well replace all of them.
thanks. ben |
#2
|
||||
|
||||
If you're referring to the copper washer in the pic, not all cars had them, but one of mine did. I went to the hardware store and picked up a composite washer. ID is 19mm, 1mm thick. OD not an issue, but it's 21mm.
Edit, 18mm x 21mm x 1.5mm. Not 19mm as mentioned above, sorry.
__________________
83 SD 84 CD Last edited by toomany MBZ; 03-10-2008 at 04:47 PM. Reason: more info |
#3
|
|||
|
|||
Thanks, that's the one I was talking about. I can see the mark on the bolt where there used to be one, but it wasn't on the car (or I lost it).
ben |
#4
|
|||
|
|||
Many auto parts stores carry the copper washers. However, you may need to ask for "brake system washers".
__________________
Sam 84 300SD 350K+ miles ( Blue Belle ) |
#5
|
||||
|
||||
Quote:
ajcbgray, send me your address, I'll mail the one in the pic. Neither of my cars need it.
__________________
83 SD 84 CD |
#6
|
|||
|
|||
I just bought a 300d tubo that is missing the aluminum washer on the banjo bolt off the spin on filter housing. Anyone know what size this is so i can run to the parts store for one. It leaks fuel pretty badly there when running.
__________________
|
#7
|
||||
|
||||
I would be interested in this as well!
__________________
1985 300SD - 167k miles 1992 F350 7.3 (Soon to be converted to 2 tank Veggy/WMO) |
#8
|
||||
|
||||
i bought a kit of washers from advance last week, in the kit there is a 3/4 one that works. its in the "help" parts section. They have other washers in the oil section for the oil pan bolt but none were big enough
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#9
|
||||
|
||||
See edit to post two.
__________________
83 SD 84 CD |
#10
|
||||
|
||||
Did you guys also replace the "O" ring on the Banjo bolt? Mine also has no washer. When it did leak replacing the "O" ring cured it.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#11
|
|||
|
|||
I searched high and low for crush washers for my system. Finally my brain started working and I went to my independent mechanic, and had me out the door with a full set as well as a spare, in about 5 minutes. Wouldn't even let me pay for them.
__________________
1985 300D, 237k. 1994 F-350, 6.9 diesel, 5 spd manual, Banks Turbo. 261k. Sold: 1985 300CD- 267K |
#12
|
|||
|
|||
The fuel filter bolt washer is 18mm. I got mine at Napa after an unsucessful attempt from the dealer. The other fuel banjo bolts are 14mm (I think). The napa part# for the 18mm is 704-1356. Good luck-it worked for me! Scott
|
Bookmarks |
|
|