|
|
|
#1
|
|||
|
|||
Driveshaft eek-a-eek-a-eek
Center support bearing.
Ahhh did my 300cd last summer. Never even looked at the sdl yet. In prep for this, same?? Drop the back half - slip it out - etc. Any advice to save time as time is limited. Thanx |
#2
|
||||
|
||||
One nice tool I find to get into the flex disc's is an air ratchet. break them all loose w/ a wrnch, but the air ratchet(not impact gun) really makes it a quick job.
I had to do mine twice, as the shop I PAYED to install the first one messed it up, only went a few K's. the second time around I was at home w/ my air ratchet, very quick job. Order in the metal washer sheild thingys front and rear, too. I am pretty sure that is why mine failed- the sheild wore thru the seal.
__________________
1984 123.193 372,xxx miles, room for Seven. 1999 Dodge Durango Cummins 4BTAA 47RE 5k lb 4x4 getting 25+mpgs, room for Seven. |
#3
|
||||
|
||||
the SDL will be a pain in the A##... lots of stuff in the way...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|