w123 not holding in park
W123 automatic is not holding in park. Is there a linkage adjustment or is this an internal locking gear problem? Thanks for pointing me in the right direction.
John |
Most likely its caused by worn shifter bushings. They are small nylon bushings underneath....probably pretty hard to get to in a W123 trans tunnel...not much room.
Worst scenario would be a damaged parking prawler in the tranny, but its unlikely. |
I'd look at the shifter bushings first.
|
Are there any diagrams/pics of the shifter bushings I can review? I don't have any idea what I would be looking for.
John |
Crawl under the car. Look at the bottom of the gear shifter; there is one bushing there. Follow the linkage which connects to the shifter on the left side of the transmission; second bushing is there.
|
Quote:
John :confused: |
All times are GMT -4. The time now is 09:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website