|
|
|
#1
|
|||
|
|||
no power TO fuses 1 & 3
lost my turn signals - '84 300SD
with the ign switch on, the respective fuses (1 & 3) have no voltage I had the dash out and replaced the ign switch, and I jumped the inst dimmer switch. Put it back together and now have no turn signals. suggestions ??
__________________
Bill '82 300SD 195K '84 300SD 199K |
#2
|
|||
|
|||
Check to see if the hazards work.
If they do, then replace fuse 12. If they don't, then check to be sure the plug is firmly inserted onto the back of the hazard switch. If you had the dash removed, the plug might have been forgotten. Report back with results. |
#3
|
|||
|
|||
BINGO
Thanks Brian I had not (yet) reassembled the console, had no clue the signals went through the hazard switch.
__________________
Bill '82 300SD 195K '84 300SD 199K |
#4
|
|||
|
|||
Anytime.
Help is what we do here. |
#5
|
||||
|
||||
Quote:
What/where is terminal 86 and what is its purpose? I thought fuses a and b covered the window lift.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#6
|
|||
|
|||
Are you looking at a W126........or a W123?
|
#7
|
||||
|
||||
I have a 123 but I am still curious to know if where that terminal 86 would be locted even if it is on a 126.
The relay for my 123 is apparently behind the instrument cluster.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#8
|
|||
|
|||
The electrical schematics for the W123 and the W126 are completely different. There is no relationship.
|
#9
|
||||
|
||||
Thanks.
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
|
|