PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Flasher Relay in W123 (http://www.peachparts.com/shopforum/showthread.php?t=217037)

S.Scogin 03-20-2008 11:46 AM

Flasher Relay in W123
 
Can anyone tell me where exactly the turn signal flaher relay is located on a W123? I know it's supposed to be under the dash somewhere, but I poked around and couldn't find it. Is it to the right or left of the steering colum? Up close or towards the engine compartment?

MattBelliveau 03-20-2008 11:48 AM

It's actually under the center console, just forward of the shifter. I beleive the e flasher switch plugs directly into it; just follow the sound of the clicking. I THINK I have an extra if you need it. Let me know. Thanks.

Jordan G 03-20-2008 12:03 PM

I always forget the year change on the 123's.....but in my 1981, the relay is IN the hazard switch.

I'm sure this doesn't help you.....but if you search the forum, you'll find it. I remember it being pointed out when I did a similar search to replace mine. Just forward of the shifter sounds right, IIRC.

Stevo 03-20-2008 01:19 PM

Quote:

Originally Posted by Jordan G (Post 1799043)
I always forget the year change on the 123's.....but in my 1981, the relay is IN the hazard switch.

I'm sure this doesn't help you.....but if you search the forum, you'll find it. I remember it being pointed out when I did a similar search to replace mine. Just forward of the shifter sounds right, IIRC.

I believe on his its under the console as stated above. Thats where it is in my 85, cost my $40 when it died. On the early 240Ds with the big emergency flasher is in that flasher, guess thats why its bigger:D.

Jordan G 03-20-2008 01:27 PM

Quote:

Originally Posted by Stevo (Post 1799131)
I believe on his its under the console as stated above. Thats where it is in my 85, cost my $40 when it died. On the early 240Ds with the big emergency flasher is in that flasher, guess thats why its bigger:D.

Yah and twice as expensive:D

It's like a big red eye staring at me in the dark too....just asking for coffee to be spilled into it.

S.Scogin 03-20-2008 10:23 PM

So do I just remove the entire faceplate to the center consol to get to the relay or is there something I can pop out to get to it?

Craig 03-20-2008 10:28 PM

Quote:

Originally Posted by S.Scogin (Post 1799597)
So do I just remove the entire faceplate to the center consol to get to the relay or is there something I can pop out to get to it?

You need to remove the horizontal wood piece around the shifter. Loosen the front under the ashtray and slid it back to release the back end. The relay is in front of the shift lever.

Stevo 03-21-2008 10:24 PM

Quote:

Originally Posted by Craig (Post 1799602)
You need to remove the horizontal wood piece around the shifter. Loosen the front under the ashtray and slid it back to release the back end. The relay is in front of the shift lever.

Roger that, on mine it was fwd and to the left of the shifter.

mendodiesel 04-18-2008 10:47 AM

is it a black one or big red one?
 
Black relAY?

MattBelliveau 04-18-2008 10:51 AM

It should be a black box. I think it might sit on a bracket...

JimFreeh 04-18-2008 12:47 PM

If the hazard switch pushes down to engage, it's the early style and is all of a piece. If it's a rocker switch, then it has the remote black box.

Changeover year is <=81 is push style, >= 82 is rocker/remote.

Jim

280EZRider 04-18-2008 12:59 PM

Everyone here is correct. And PLEASE, after removing the two screws and ashtray bracket, gently slide the console cover back - not up. If you pull it up, you will break off the plastic pin at the back of the cover!

Lexxani 04-18-2008 01:01 PM

whole hazzard switch (has flasher in it, the same one on your 123 as all early push button 123's and 107's). . $10 Junkyard. . .true story. . .

europower 04-18-2008 01:21 PM

Does anybody here want to by a brand new mb relay? i have an extra i bought its hella on the box
40 shipped
let me know


All times are GMT -4. The time now is 08:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website