|
|
|
#1
|
||||
|
||||
What's The P/N for 300td Rear/Quarter Window Trim Clips?
Y'all,
I'm trying to determine the P/N for the rear window trim clips on a 300td, as shown below (thanks to Chad300tdt and this post of his): The clips on mine are in much worse shape and are not reusable. I can't find the P/N on either the detali.ru site or at the online EPC. Thanks in advance for your assistance! Now, the second issue is whether they're available... Thanks, Shawn |
#2
|
||||
|
||||
Take a cordless drill to a junkyard and drill out the rivets to get a few clips. Some of my clips were in pretty bad shape. I soaked them in metal prep and painted them before riveting them back in place. I also needed to squeeze them with a pliers to close the clip more since they bent open a bit when I was prying the trim off.
I'd be interested in knowing where to buy new ones too.
__________________
Chad 2006 Nissan Pathfinder LE 1998 Acura 3.0 CL OBK#44 "Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.) SOLD 1985 300TD - Red Dragon 1986 300SDL - Coda 1991 - 300TE 1995 - E320 1985 300CD - Gladys |
#3
|
||||
|
||||
Ah, but there'd have to be a 300td in the yard first.
|
#4
|
||||
|
||||
It looks like the trim on the doors might be attached the same way. Maybe you could find them on a sedan?
__________________
Chad 2006 Nissan Pathfinder LE 1998 Acura 3.0 CL OBK#44 "Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.) SOLD 1985 300TD - Red Dragon 1986 300SDL - Coda 1991 - 300TE 1995 - E320 1985 300CD - Gladys |
#5
|
||||
|
||||
Nope, it's not the same. The door trim is held on by a W-shaped piece that goes over the top of the door skin and holds the trim on the outside and the door squeegee on the inside.
|
#6
|
||||
|
||||
Quote:
(Sorry for hijacking ... PM me if you prefer)
__________________
Chad 2006 Nissan Pathfinder LE 1998 Acura 3.0 CL OBK#44 "Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.) SOLD 1985 300TD - Red Dragon 1986 300SDL - Coda 1991 - 300TE 1995 - E320 1985 300CD - Gladys |
#7
|
||||
|
||||
Quote:
Sorry, but I'm not a "Take pics of every part I touch and post them on the board" (or "Here's a video of my engine starting -- exciting!") kind of guy. Basically, imagine the top edge of the door skin -- about 1/2" tall, two sheetmetal thicknesses wide. The clip fits over this, like a lazy W straddling a fence, but with the W being three Us put together. The outside U holds the aluminum trim, the inside U holds the squeegee. I simply pulled the squeegee up with pliers, then used a large screwdriver to flex the inside U so the upside down U over the door skin edge was spread apart, then pulled up (going down the line a little bit at a time). I do have to do the front squeegees, so I'll try to remember to take pics for you. |
#8
|
||||
|
||||
Thanks Shawn, your description makes it more clear. I think I could handle it based on that. But ... if you remember pics when you do the fronts, that would be cool.
__________________
Chad 2006 Nissan Pathfinder LE 1998 Acura 3.0 CL OBK#44 "Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.) SOLD 1985 300TD - Red Dragon 1986 300SDL - Coda 1991 - 300TE 1995 - E320 1985 300CD - Gladys |
#9
|
||||
|
||||
can you wait??
I'm not quite ready to take the windows out........yet.
__________________
daw_two Germantown, TN Links: Sold last car --- 05/2012 1984 300D Light Ivory, Red interior Cluster Needles Paint New Old Stock (NOS) parts Past: 3/2008 1986 300SDL "Coda" 04/2010 1965 190D(c) "Ben" & many more |
#10
|
||||
|
||||
If you could let me know when you do -- I'll see what I can cook up in the meantime.
|
Bookmarks |
|
|