Gentlemen,
I am in a quest to get my turbo charger to stop shaking. First we replaced the engine mounts, which were so-so, but not terrilbe. Then we replaced the Engine shocks and mounts, which were terrible and this made a big difference. Two weeks later, the vibrations are getting worse so I notice the turbo charger is barely hanging on to the engine and the u-boot keeps vibrating off. So I replaced the bracket and mounts. While the turbo was off, I noticed the underside consisted of a piece of fuel tube coming out of the bottom of the turbo that is supposed to connect to the attached picture (picture is not my car). When I replaced the turbo, I made the tube go into this piece, but I would like a much better solution that might stop some of the vibrations. Oil isn't really leaking much at all. I need to know a part name or number for this oil assembly inside my air filter housing. Or do I need to get a turbocharger that wasn't rigged at a junkyard? Any thoughts?
Thanks!