Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-13-2008, 07:44 AM
Registered User
 
Join Date: May 2001
Posts: 169
W210 Startup

I would apprciate some advice.
When replacing glowplugs one, closed to rear of the engine, broke. I removed the starter + oil filter housing to be able to work and try to removed. It was not possible.

Then I put everything back, including reconnecting the Crankshaft sensor, and the manifold, except that I forgot to connect the two tubes, one EGR, to it. I reconnected the battery and tried to start the car. After a few cranks started.

Then I turned the engine off, bolted the manifold properly, connected the tubes to the manifold, reconnected the fuel lines to a diesel purge bottle so I could clean the system a little bit. Then I recranck without any success. I checked the transparent fuel line going to the diesel purge and they are empty.

Do you have any advice to get it started?
PAT
__________________
pat201
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2026 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page