|
|
|
|
|
#1
09-20-2008, 09:47 PM
|
||||
|
||||
|
No heat from the heater
I have recently replaced the Heater/AC solenoid unit on my 1978 300CD. The AC works fine as does the defroster, but I have no heat coming from the unit whatsoever. Coolant lines in and out of the dash, as well as the solenoid are hot, so I know the coolant is making the rounds. I have to assume the air may not be blowing past the heater core. Any thoughts on what might be causing this?
__________________
"If we can't have fun while we're here, we might as well go to the house". 1978 300CD 1985 300TD 1999 Land Rover Discovery II rover1@sbcglobal.net 
|
|
#2
09-21-2008, 12:26 AM
|
||||
|
||||
|
When you say you replaced your solenoid unit.. are you refferring to the "mono valve" out under the hood on the fire wall?
Rick
|
|
#3
09-21-2008, 08:36 AM
|
||||
|
||||
|
No, it is actually the Servo unit, not a solenoid. It sits just forward of the Air cleaner. These are notorious for failing in the earlier models. They were replaced later by the monovalve.
__________________
"If we can't have fun while we're here, we might as well go to the house". 1978 300CD 1985 300TD 1999 Land Rover Discovery II rover1@sbcglobal.net
|
 |
| Bookmarks |
|
|
Linear Mode
