|
|
|
#1
|
|||
|
|||
Power Steering Pump Help!!
I am doing another engine swap and when I took the Power Steering Pump off my old engine, one of the mounts broke in 2 pieces. My local welder is closed for the weekend but....
Is there any replacement for mounting tabs without replacing the entire pump? These should have been a separate plate bolted to the pump not incorporated into the pump. It is off of my 91 350SD "rodbender". The pump is a Vickers Tandempump.
__________________
1987 350SDL Parts Car 1987 350SDL #2 Sons Car 1991 350SD My Car-RIP 9/7/09 1992 300SD Her Car 1995 E300 Spare Car-RIP 4/23/09 1992 S320 My Car - Soon to be diesel 1990 W250 4x4 Cummins #1 Son's Truck 1993 D350 Cummins My Truck 1999 3500 Cummins Just Another Truck 1987 Executive Cat 3208 Family Wagon "Growing up is a choice. Growing old is a privilege" |
#2
|
||||
|
||||
The 90-91 350SD/L is gaining reputation as a pump breaker as well. From what I've read, you need a new tandem pump. Yours is no good as a core exchange either. Check with forum member Mekanic who just went through this but with a non-tandem pump. Maybe an 87 300TD tandem pump will work. If so, David Hendy in the parts forum might be able to help.
Sixto 87 300D |
#3
|
|||
|
|||
Okay, I will try that. I do have two more pumps but one is not a tandem and the other uses smaller hoses.
Would the smaller hoses make a difference?
__________________
1987 350SDL Parts Car 1987 350SDL #2 Sons Car 1991 350SD My Car-RIP 9/7/09 1992 300SD Her Car 1995 E300 Spare Car-RIP 4/23/09 1992 S320 My Car - Soon to be diesel 1990 W250 4x4 Cummins #1 Son's Truck 1993 D350 Cummins My Truck 1999 3500 Cummins Just Another Truck 1987 Executive Cat 3208 Family Wagon "Growing up is a choice. Growing old is a privilege" |
#4
|
||||
|
||||
So what did you do with the old block?
Sixto 87 300D |
#5
|
|||
|
|||
Sorry about that, I was out transferring WVO for processing.
OMG, you should see all the Mercedes parts I have everywhere!!!! I have 2 rodbenders complete with IP, turbos, pumps, compressors, everything. I have an entire 87 300SDL complete, without the engine (it's in my 91 350SD now). That's why I was trying to make hoses and/or pumps fit.
__________________
1987 350SDL Parts Car 1987 350SDL #2 Sons Car 1991 350SD My Car-RIP 9/7/09 1992 300SD Her Car 1995 E300 Spare Car-RIP 4/23/09 1992 S320 My Car - Soon to be diesel 1990 W250 4x4 Cummins #1 Son's Truck 1993 D350 Cummins My Truck 1999 3500 Cummins Just Another Truck 1987 Executive Cat 3208 Family Wagon "Growing up is a choice. Growing old is a privilege" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|